MPPT 220V 2.2KW 3HP 10A Solar Pump VFD Solar Pumping Inverter
ZK SG600 solar pump Inverter mainly features:
1. MPPT efficiency more than 99%.
2. Drives well all 1/3 phase AC pumps and PMSM in solar pumping system. 3. Voc of solar panel can set by manual or MPPT automatically tracking.
4. Solar DC & Grid AC power supply input both ok.
5. Dry run & Full water tank protection.
6. Short circuit, over load, over current... motor production.
7. The PQ (power/flow) performance curve enables calculating the flow output from the pump
8. Ambient temperature for using: -10 to +50˚C.
9. Inverter Power range: 220V, 0.75KW to 110KW. 380V/480V, 0.75KW to 250KW
How to select the solar panels? Need enough voltage and power, and the Voltage can not big than input range.
| Input voltage, power solar selection |
| Pumps model | Inverte models | Vmp | Voc | Total Power of solar arrays |
| 110VAC pump | 1S (for 110V) | 130VDC | 156VDC | ≧ (1.3 to 2.0) rated power of Pump It is also depend on the quality of solar panels. The higher the power input, performance will be better |
| 220VAC pump | 2S (for 220V) | 310VDC | 372VDC |
| 380VAC pump | 4T (for 380V) | 540VDC | 648VDC |
Specifications:
| Model | 2S 220V Single phase
e.g. SG600-2K2GB-2S | 2S 220V 3phase
e.g. SG600-2K2GB-2S | 4T 380/440V 3phase
e.g. SG600-2K2GB-4T |
| AC input voltage (Vac) | 220VAC ±15% | 380VAC ±15% |
| Rated power (KW) | 0.75KW to 4KW | 0.75KW to 75KW | 0.75KW to 250KW |
| Max. DC input voltage (Vdc) | 440 | 440 | 800 |
| Start-up voltage (V) | 200 | 200 | 300 |
| Lowest working voltage (V) | 150 | 150 | 250 |
| Recommended DC input voltage range (V) | 200~400 | 200~400 | 300~750 |
| Recommended Vmp (V) | 310 | 310 | 540 |
| Recommended Voc (V) | 372 | 372 | 648 |
| Rated output voltage (V) | 220 1PHASE | 220 3PHASE | 380 3PHASE |
| Output frequency range (Hz) | 0~50/60hz (0-600HZ for PMSM) |
| Running mode | MPPT, CVT, VF |
| MPPT | 99% |
| Protection function | Dry run, fulll tank detect, over current... more than 20 pro |
| Remote controller | GPRS remote controller is optional |
| Installation manner | Wall mounting /Rail mounting /Flange mounting |
| Environment temperature | -10~+50℃ |
| Altitude | Below 1000m, If above 1000m, derate 1% for every additional 100m. |
| Cooling manner | Fan cooling |
| Protection level | IP20; (IP54 isoptional) |
Model number and specificaions:
| SN | Models | Rate current | Output voltage ( 3PH VAC) | Applicable for pumps | MPPT voltage (Recommend VDC) |
General type: 2S series 150 to 450 VDC or 200 to 240VAC input, Voc 450VDC/336VDC
(90-450VDC input for 220V 2.2KW, can drives well the 96V/110V pmsm pump) |
| 1 | SG600-0K7GB-2S | 4A | 220V/240V | 0.75KW | 260 to 400 |
| 2 | SG600-1K5GB-2S | 7A | 220V/240V | 1.5KW | 260 to 400 |
| 3 | SG600-2K2GB-2S | 10A | 220V/240V | 2.2KW | 260 to 400 |
| 4 | SG600-4K0GB-2S | 16A | 220V/240V | 4.0KW | 260 to 400 |
| ** | SG600-**GB-2S | ** | 220V/240V | 5.5KW-75KW | 260 to 400 |
| General type: 4T series 250 to 800 (900) VDC or 300 to 440VAC input, Voc 540VDC/616VDC |
| 5 | SG600-0K7GB-4T | 2.5A | 380V-440V | 0.75KW | 486 to 750 |
| 6 | SG600-1K5GB-4T | 3.7A | 380V-440V | 1.5KW | 486 to 750 |
| 7 | SG600-2K2GB-4T | 5A | 380V-440V | 2.2KW | 486 to 750 |
| 8 | SG600-4K0GB-4T | 10A | 380V-440V | 4.0KW | 486 to 750 |
| 9 | SG600-5K5GB-4T | 13A | 380V-440V | 5.5KW | 486 to 750 |
| 10 | SG600-7K5GB-4T | 17A | 380V-440V | 7.5KW | 486 to 750 |
| 11 | SG600-011GB-4T | 22A | 380V-440V | 11KW | 486 to 750 |
| 12 | SG600-015GB-4T | 30A | 380V-440V | 15KW | 486 to 750 |
| 13 | SG600-018GB-4T | 37A | 380V-440V | 18KW | 486 to 750 |
| 14 | SG600-022GB-4T | 45A | 380V-440V | 22KW | 486 to 750 |
| 15 | SG600-030GB-4T | 60A | 380V-440V | 30KW | 486 to 750 |
| 16 | SG600-037GB-4T | 75A | 380V-440V | 37KW | 486 to 750 |
| 17 | SG600-045GB-4T | 91A | 380V-440V | 45KW | 486 to 750 |
| 18 | SG600-055GB-4T | 110A | 380V-440V | 55KW | 486 to 750 |
| 19 | SG600-075GB-4T | 150A | 380V-440V | 75KW | 486 to 750 |
| 20 | SG600-090GB-4T | 180A | 380V-440V | 90KW | 486 to 750 |
| 21 | SG600-110GB-4T | 220A | 380V-440V | 110KW | 486 to 750 |
| 22 | SG600-132GB-4T | 260A | 380V-440V | 132KW | 486 to 750 |
| 23 | SG600-160GB-4T | 320A | 380V-440V | 160KW | 486 to 750 |
| 24 | SG600-**GB-4T | ** | 380V-440V | 200-280KW | 486 to 750
|
ZK solar pump inverte All with 18 months warranty and technical support any time.
FAQ:
Q1 : What is the solar water pump Inverter?
ZK Solar pump inverter drives well all kind of water pump including single phase pump and PMSM in solar pumping system, solar DC and Grid AC input. MPPT efficiency more than 99%.
Q2: What should be noticed when installing inverter?
Install the Inverter in a place where is well ventilate,cool, dry and water-proof. long services life.
Q3: Do we need to set the parameter before using ?
Our inverter is AI intelligent working, can automatic tracking the DC bus voltage.
You can set parameters if you want other functions like Dry run, full tank detect.
Q4:Where is your factory located?
Our factory is located in Shenzhen, China, most welcome to visit us. We can pick up you from the Shenzhen Airport or High Speed Rail Station to our factory.
Q5:What is the supply capacity of your factory?
9000pcs inverters can be produced every month.
Export 7000-9000pcs inverters every month, to Thailand, India, Pakistan, the Middle East like Syria, Saudi, Yemen, Turkey, Egypt... All African and South America like Mexico, Brazil.
Sample be delivery around 3-5days, bulk order around 10-30 days.
Support OEM & ODM!
|
|
MPPT 220V 2.2KW 3HP 10A Solar Pump VFD Solar Pumping Inverter Images
|
